Monster Seal Premium Tire Sealant is now available through RV Dealers

Our Monster Seal tire sealant formula has been trusted and proven for over 40 years in millions of tires around the world... in everything from bikes and on-road vehicles to the largest over the road trucks and off-road earth moving equipment.  Monster Seal is used by the US Military, National Parks Service, US Postal Service, Municipal and Public Works and Police and Fire Departments, along with countless tire, commercial and industrial companies around the world. 

Monster Seal automatically prevents and repairs flat tires, while increasing both tire life and fuel economy by maintaining tire air pressure. Monster Seal also increases the vehicle safety and operation by helping ensure tires are at the proper tire air pressure.  

Monster Seal continues to be the #1 Tire Sealant in Off-Road Racing year after year, and is trusted by the winningest racers from motorcycles to million dollar trophy trucks and everything in between. Visit www.MonsterSeal.com to learn more about Monster Seal tire sealant. 

MONSTER SEAL RV provides the worlds best premium tire sealant and premium paint and fabric protection products through RV dealers across North America. RV dealers professionally apply our products and offer 3, 5 and 7 year protection, backed by our unmatched Limited Warranties. 

=========================

PRODUCT INFORMATION - INSTALLATION DIRECTIONS - DEALER SUPPORT:

MONSTER SEAL PREVENTS & REPAIRS FLAT TIRES AND SEALS SLOW LEAKS FOR LIFE OF THE TIRE. IT JUST WORKS!

MONSTER SEAL - works in both tubeless and tube type tires, on and off road, traveling at both high and low speeds. The air pressure in the tire forces Monster Seal into the tread area punctures allowing multiple types of sealing solids to make a permanent seal in the tread area that flexes with the rubber.  Monster Seal will seal punctures up to 1/2" in most vehicle tires, and up to 3/4" inch in diameter punctures in tires used on larger trucks and heavy duty off road equipment.  Monster Seal works for the life of the tire... Guaranteed!. 

MONSTER SEAL is an advanced Glycol based and water soluble solution that contains corrosion inhibitors to protect the tires and wheels. Monster Seal cools the tire operating temperatures, which helps increase the tire tread life. Monster Seal will also help increase the vehicle safety by helping maintain proper tire air pressure.

MONSTER SEAL works great in everything from bicycles to large earth moving equipment. It's perfect for vehicles, on and off road trucks, refuse trucks, tractors, loaders, trailers, campers, RVs, Coaches, buses, ATVs, UTVs, sand cars, sand rails, dune buggies, motorcycles, golf carts, forklifts... and of course... the Fastest Off Road Racing Vehicles on the Planet. 

MONSTER SEAL tire sealant has been used in millions of tires around the world over since 1975, and trusted by the US Postal Service, US Military and US National Park Service, in addition to many state and local municipalities, police and fire departments, and countless commercial and industrial companies around the world for over forty five years.

MONSTER SEAL HELPS MAINTAIN CORRECT TIRE PRESSURE, WHICH INCREASES TIRE LIFE AND FUEL ECONOMY

MONSTER SEAL provides a protective coating which holds in place on the inside of the tire. It helps prevent the air porosity leakage and under inflation which naturally occurs in tires.  It never dries out inside your tire.  Monster Seal is also compatible with nitrogen filled tires.

MONSTER SEAL HELPS SEAL SMALL RIM LEAKS AND BEAD AREA LEAKS

MONSTER SEAL works it way to the bead areas to help seal minor bead leaks and minor rim leaks, which are very difficult to detect and expensive to correct. 

MONSTER SEAL WORKS FOR THE LIFE OF THE TIRE... GUARANTEED.

Monster Seal remains liquid and effective for the life of the tire. It remains homogenous and never separates in the container, or in the tire.  It never dries out or balls up inside the tire. Monster Seal includes an adhesion agent which helps holds it in place, so it will not flow or pool in the bottom of the tire, even after the vehicle is parked for extended periods of time.  This continuous protective coating helps prevent the air loss by preventing the natural rubber porosity leakage. Monster Seal's adhesion agent holds it in place when the tire is being dismounted so it won't make a big mess.  It's also water soluble and easy to rinse out of a tire. It is biodegradable and can be rinsed down the municipal storm drains. 

MONSTER SEAL COMES READY TO USE - NO MIXING OR SHAKING IS NEEDED

MONSTER SEAL INSTALLATION

MONSTER SEAL is easy to install through the tire valve stem from a small squeeze bottle, a one gallon jug with a small one ounce hand pump, or from a five gallon container using our hand injection pump kit. Our 5-gallon hand pump will overcome up to 50 psi tire pressure, so you don't need to fully deflate your tires to install Monster Seal from a 5-Gallon container.  

The hand pump is adjustable and will inject up to ten (10) ounces per full pump stroke.  All of our containers include a valve core removal tool, easy to follow instructions and tire size charts on the labels. The 5-gallon hand pump kit includes a valve core removal tool, detailed tire size / ounce per tire chart, and installation instructions. It only takes less than two minutes to install Monster Seal into a passenger car tire with the hand pump from a five gallon pail. 

INSTALLATION PROCESS FOR THE 5-GAL. PAIL AND 5- GAL. HAND PUMP:

- Position the tire valve core between 1-5 or 7-11 o'clock 

1. Remove the valve core from the valve stem. (Valve core tool included with pump kit)

2. Deflate the tire to under 40 psi -  (hand pump will overcome up to 50 psi tire pressure)

3. Attach the quick connect hose fitting onto the valve stem. 

4. Pump the sealant into the tire (pump injects up to 10 ounces per stroke)

(If pump clogs - do not force it. Bach the connector off the stem and allow pressure in the tire to free the clog, or use a firm piece of wire to clear the clog and continue pumping. 

5. Insert the valve core back into the valve stem

6. Inflate the tire to the correct pressure listed on the sidewall of the tire.

7. When the vehicle is driven, the sealant will coat the inside of the tire.

INSTALLATION FOR A BOTTLE OR A ONE GALLON JUG WITH THE ONE OUNCE HAND PUMP:

- Position the tire valve core between 1-5 or 7-11 o'clock 

- Valve core tool and filling hose under bottle cap. 

- Snip off end of the pointed nozzle on the cap and attach hose to end of nozzle.

1. Remove the tire valve core and fully deflate the tire - remove all air pressure

2. Place the hose over the valve stem.

3. Squeeze the bottle to inject the recommended ounces of sealant into the tire

4. Install the valve core back into the valve stem

5. Inflate the tire to proper air pressure note on the side of the tire

6. If tire contains puncturing object, remove it and drive at least 1/4 mile to make a seal

7. If tire delates, re-inflate and drive further to make a seal.

Monster Seal is designed to seal tread area punctures and small rim and bead leaks.

PNEUMATIC INJECTION PUMP SYSTEM:

We have manufactured a special "Monster Seal Pneumatic Injection Pump and Air Hose and Inflator System" which quickly installs Monster Seal without deflating the tire.  Our patent pending installation tool connects to the valve stem and quickly removes the valve core back into a connected chamber.  After the sealant is installed, the valve core is screwed back into the valve stem. The attached air hose and inflator is used to ensure the tire has the correct air pressure. 

The pneumatic pump works with your air compressor/source and reduces the installation time by up to 75% or more. The pump system can be used with a five gallon pail, 55 gallon drum. Our pneumatic injection system includes a 25 foot combined sealant and air hose, and a tire gauge and inflator.  It only takes about three minutes to install 46 ounces into a large truck or Class A, Super C RV tire. 

PNEUMATIC PUMP INSTALLATION PROCESS:

- Set the pump air pressure meter on pump to 100 to 120 psi

1. Attach the special Monster Seal installation tool to the tire valve stem.

2. Use the  tool to unscrew the valve core.  Leave the air pressure  in the tire.

3. Inject the Monster Seal into the tire. The pump includes an ounce meter. 

4. Clear the valve with shot of air with the attached inflator hose.

5. Screw the valve core back into the valve stem.

6. Set the correct tire air pressure using the attached inflator/tire gauge. 

7. Remove the special Monster Seal tool from the tire valve stem.

8. Attach the special tool to the valve stem vent on the side of the 5-gallon pail. 

HOW MUCH MONSTER SEAL PER TIRE CALCULATION FORMULAS:

Example ounces per tire for RV tires:

Class A & Super C motorhomes - 46 ounces per tire - includes all tire sizes

Class B - 20 ounces per tire - 19" - 20" wheels

Class C - 16 ounces per tire - Includes 16" - 18" wheels

Trailers - 16 ounces per tire - includes all trailer tire sizes

Other tire application size information:

Commercial on-road use:  Tire Height X Tire Width ➗ 10 = ounces per tire

Commercial off-road high flat rate use: Tire Height X Tire Width ➗ 5 = OZ per tire

Passenger vehicle use: Tire Height X Tire Width ➗ 27 = ounces per tire

Most passenger vehicles will use either: 8, 9, 10 or 12 ounces per tire depending on size.

More  tire types and amounts per tire:

Bike - 4 to 6 ounces per tire 

Motorcycle - 8 ounces per tire

Passenger Vehicle - Wheel size: (14"-15" 8oz)  (16"-19" 9oz)  (20"-22" 10oz per tire)

SUV - 16"-17" 10oz,  18-22" 12oz per tire 

ATV - 24oz front  & 32oz rear

UTV - 32 ounces for all UTV tire sizes

Wheel Barrow - 8 ounces

Golf Cart - 20 ounces 

Riding Mower 16 to 24 front, 24 to 40 Rear 

MONSTER SEAL utilizes numerous recycled ingredients, components and packaging. Monster Seal is Water Soluble, Bio-Degradable, Non-Hazardous, Non-Flammable, Non-Combustible, and is not packaged under pressure. Monster Seal has an indefinite shelf life in a sealed container. Monster Seal can be washed down the municipal storm drains.

. 

SDS - Safety Data Sheets and MSDS - Material Safety Data Sheets are available upon request. Please request by email to:  Sales@monsterseal.com 

MONSTER SEAL DEALER SUPPORT - Please Contact: 

Bill Martin - Direct: 408.823.1000  / Bill@MonsterSeal.com

Brian Savedra - Direct: 408.504.6600  /  BSavedra@gmail.com

Ken Argent - Direct: 408-655-5139 / Ken@monstersealrv.com

MONSTER SEAL DEALER TECHNICAL SUPPORT - Please Contact: 

Bill Martin - Direct: 408.823.1000  / Bill@MonsterSeal.com

David Pricket - Direct: 559.352.7071 - Pneumatic Pump tech support

Brian Savedra - Direct: 408.504.6600 Hand  Pump Installation support

MONSTER SEAL... DON'T DRIVE OFF WITHOUT IT! tm